Propylene Glycol 30% (to -13°C) - MPG | 1000L IBC (for cooling and heating systems)

Information

Special propylene glycol, Axti Temp P, for cooling and heating installations. This product is based on hygroscopic, environmentally compatible propylene glycol. It contains inhibitors and low-foaming additives against rust and limescale deposits and is non-corrosive, protecting the inner walls of pipework against corrosion and product ageing, including aluminium pipework. The liquid can be added without problems to systems already filled with a propylene glycol based coolant. It is virtually odourless, slightly sticky, mixes well with demineralised water and is non-volatile.

This IBC is supplied ready mixed with class A demineralised water at the stated concentration, so it can be used directly without further dilution.

Mixing ratios

• 20% product, 80% demineralised water = protection down to -6°C
• 30% product, 70% demineralised water = protection down to -13°C
• 40% product, 60% demineralised water = protection down to -21°C
• 50% product, 50% demineralised water = protection down to -33°C
• 60% product, 40% demineralised water = protection down to -57°C

Features

• Large IBC pack (1000 L): economical for installers, maintenance contracts and industrial applications
• Certified quality: suitable as antifreeze in refrigeration and HVAC installations, prevents freezing and protects against frost damage
• Compatible with a wide range of materials and cooling media, applicable in installation, refrigeration and heat pump technology
• Reliable protection for pipework, equipment and heat exchangers in temperature-sensitive processes
• Easy to pump and distribute within technical infrastructures thanks to the IBC packaging

Applications

• Refrigeration and freezing installations in the food industry and cold chain logistics
• Heat pump systems, air conditioning units and HVAC installations in commercial buildings and industry
• Process installations where a glycol mixture is required to prevent freezing or temperature loss
• Industrial systems at low ambient temperatures or installed outdoors

Directions for use

• Before starting, check the existing cooling or heating system for compatibility with glycol mixtures
• Use the product at the correct concentration for the required operating or storage temperature to guarantee optimum corrosion protection and antifreeze value
• Fill the system completely, vent the pipework if necessary and check the quality and concentration periodically (for example with a refractometer)

Inhibitors and extra protection

Our glycol products in concentrations of 30%, 40%, 50% and 100%, both mono ethylene glycol (MEG) and mono propylene glycol (MPG), are supplied as standard with a basic package of inhibitors. These inhibitors help protect the installation against corrosion and acidification. If you want the glycol without basic inhibitors, please state this clearly when ordering. Depending on the application, the materials used and the conditions in the installation, additional protection may be needed; extra inhibitors can be added to the glycol on request.

Important return information for glycols

Because we always aim for the highest quality, there are some situations in which we cannot accept returns:

• Special glycol percentages produced on request that are not part of our standard range cannot be returned
• Opened cans or IBCs are not taken back, as we can no longer guarantee the quality
• Glycol mixed with dye produced at your request cannot be returned

If in doubt, please contact us before ordering glycol.

All packaging sizes and concentrations are available, ask for our prices. Also see our other types of glycol.