Propylene glycol 30% (up to -13C)

Special Propylene Glycol, Axti Temp P, for refrigeration and heating systems. This product is based on hygroscopic, environmentally compatible Propylene Glycol. It contains inhibitors and low-foaming additives to prevent rust and limescale deposits and is non-corrosive, which protects the inner walls of pipes against corrosion and product aging, even in aluminum pipes. The fluid can be easily added to systems already equipped with a Propylene Glycol-based coolant. It is virtually odorless, slightly tacky, easily miscible with demineralized water, and non-volatile.

Axti Temp P 30% provides protection down to approximately -13 degrees Celsius.

Mixing ratios
20% product - 80% demineralized water = protection down to -6 degrees Celsius
30% product - 70% demineralized water = protection down to -13 degrees Celsius
40% product - 60% demineralized water = protection down to -21 degrees Celsius
50% product - 50% demineralized water = protection down to -33 degrees Celsius
60% product - 40% demineralized water = protection down to -57 degrees Celsius

All packaging & Concentrations are available, please inquire about our prices ([email protected])

Important return information for glycols

We would like to point out some important conditions regarding returning glycols. Because we at Huchem always strive for the highest quality, there are a few situations in which we cannot accept returns:

• Special percentages of glycol produced on request that are not part of our standard range cannot be returned.
• We do not accept returns of opened cans or IBCs, as we can no longer guarantee the quality.
• Glycol mixed with dye that were produced on your request, unfortunately, we cannot accept returns either.

Therefore, if in doubt, we advise you to always contact us before ordering glycol.