Ethylene glycol 50% (down to -21C)
Ready-to-use ethylene Glycol, also known as Axti Temp E, for refrigeration and heating installations. It contains inhibitors and additives against rust and limescale deposits and is non-corrosive. The 50% ethylene glycol protects up to minus 33 degrees.
Read more
Ethylene glycol / antifreeze is a heat transfer fluid for use in cooling and heating installations, among other applications. Mixing ratio: 50% glycol - 50% demineralised water.
Ethylene glycol / antifreeze is a heat transfer fluid for use in cooling and heating installations. Mixing ratio: 50% glycol, 50% demineralised water, frost protection down to -33°C.
Ethylene glycol / antifreeze is a heat transfer fluid for use in cooling and heating installations. Mixing ratio: 50% glycol, 50% demineralised water, frost protection down to -33°C.
Special Ethylene Glycol, Axti Temp E, for cooling and heating technical installations. It contains inhibitors and low-foaming additives against rust and limescale deposits and is non-corrosive, which protects the inner walls of pipes against corrosion, product aging, even in aluminum pipes. The liquid can be easily added to systems that are already equipped with a coolant based on Glycol. It is virtually odourless, slightly sticky, easy to miscede with demineralised water and non-volatile.
The Axti Temp E 50% provides protection up to approximately -33 degrees Celsius.
Mixing ratios:
20% product - 80% demineralised water = protection up to -8 degrees Celsius
30% product - 70% demineralised water = protection up to -15 degrees Celsius
40% product – 60% demineralised water = protection up to -21 degrees Celsius
50% product – 50% demineralised water = protection up to -33 degrees Celsius
60% product – 40% demineralised water = protection up to -57 degrees Celsius
All packaging & concentrations are available, ask for our prices ([email protected])
Please note! Glycols that have been mixed with a dye cannot be returned.
Also check out our other types of glycol.