Workshop Pro Heavy Duty Degreaser / 10L Can
Workshop Pro Degreaser is a concentrated industrial cleaner for grease, oil and stubborn dirt. Suitable for machinery, vehicles and workshops. Low foaming, pH 9, biodegradable, suitable for manual and machine application.
Specifications
| Article number: | AL-2098-10-PRO |
| Weight: | 10 kg |
No reviews found
Read or write a review
Information
Workshop Pro Degreaser is a highly concentrated cleaner for professional and industrial applications. Its advanced formula, with carefully selected surfactants, ensures that stubborn dirt is easily loosened and removed. This includes grease residues, oil, traffic film, weathering deposits and other heavy industrial soiling.
The cleaner has a bright fluorescent yellow colour, a distinctive odour and low foaming. This makes Workshop Pro Degreaser suitable for both manual cleaning and use in cleaning machines. Thanks to its alkaline action, with a pH value of 9 (in solution), the product delivers powerful cleaning performance while remaining widely applicable on a variety of surfaces.
Workshop Pro Degreaser has been developed for professional environments where reliability, efficiency and high cleaning power matter. When used correctly and at the right dilution, the product is safe to use. The cleaner is readily soluble in water, biodegradable and is not classified as hazardous to the environment.
Directions for use
Dilution
The correct mixing ratio depends on the amount and type of soiling. Use the guidelines below:
| Type of soiling | Recommended dilution |
|---|---|
| Heavy industrial soiling | 1:1 to 1:5 |
| Normal daily cleaning | 1:10 to 1:25 |
| Light soiling and maintenance | 1:25 to 1:50 |
Tip: Performance is improved when the product is applied to a dry surface. Using warm water also delivers an even better cleaning result.
Application
Workshop Pro Degreaser can be applied using a variety of tools, such as:
- Sponge
- Cleaning cloth
- Brush or scrubbing broom
- Mop
- Pressure washer
- Spray or misting equipment
Apply the diluted solution evenly to the surface to be cleaned and allow the product a short time to work. Do not allow the cleaner to dry on the surface.
Rinsing
After cleaning, rinse the treated surface thoroughly with clean water. This completely removes any loosened dirt and product residues.
Applications
Workshop Pro Degreaser is suitable for a wide range of professional cleaning tasks, including:
- Machinery, equipment and tools
- Workshop floors and industrial surfaces
- Water-resistant materials
- Plastics, metal and lacquered parts
- Technical installations and maintenance areas
- Vehicles, trailers, containers and bodywork
- Boats, ship decks and engine rooms, thanks to its powerful degreasing action and low foaming
Technical properties
- Colour: Fluorescent yellow
- Odour: Characteristic
- pH value: 9 (at 20 °C)
- Density: 1.02 g/cm³ (at 20 °C)
- Boiling point: approximately 100 °C
- Flash point: above 100 °C
- Auto-ignition temperature: 210 °C
- VOC content: 5.454%
- Flammability: Combustible, but not highly flammable
