Stone & Concrete Impregnator 10L (33m2) - Water-Based Facade & Masonry Sealer
Water-based impregnating agent based on siloxanes and silanes. For impregnating (water repelling) exterior walls and facades, concrete floors, roof tiles, natural stone and more. Very strong deep action, UV resistant, solvent free and vapour permeable.
Specifications
| Article number: | OP-4038-10 |
| EAN: | 8720297257179 |
| Weight: | 10 kg |
No reviews found
Read or write a review
Information
Huchem Stone and Concrete Impregnator is a water-based impregnating agent based on siloxanes and silanes. Water-based means no harmful solvents are used, which makes the product safe and easy to apply. It is also resistant to UV radiation and breathable.
What can I impregnate with it?
The impregnator can be used on all kinds of stone and ceramic materials, such as:
- brick walls and facades
- concrete and aerated concrete
- block paving
- roof tiles
- sandstone
- masonry and render
- marble and natural stone
How do I apply it?
Before you start: do not apply at temperatures below 5°C. Repair any damage to the facade or wall first. Pointing and repairs must dry for at least 3 days. Make sure the wall, facade or floor is clean before you start; if necessary clean it first with Huchem Wall and Facade Cleaner or Scrubbing Soap.
Application
Shake before use. Apply the impregnator undiluted to a clean, dry surface with a pressure sprayer, by flooding (on floors), with a paint roller or with a wide brush. Work from the bottom up. Two coats applied wet on wet give the best result. Remove splashes on paintwork and windows as soon as possible.
How much do I need?
Consumption varies a lot per surface. On average it is 0.2 to 0.5 litres per m2. For very porous, absorbent surfaces such as (aerated) concrete, count on the higher end. For brick about 0.3 litres per m2 is a good guide, although this also varies per type. Marble and natural stone usually need a little less. Better to have slightly too much than too little.
What do I do with leftover impregnator?
Stone and Concrete Impregnator keeps well, so you can treat the surface again after 1 to 2 years. The absorption will be much lower because the surface has already been treated, so you need less. You can also use the remainder on your driveway or patio tiles, which will then get dirty less quickly and suffer less from green deposits.
Please note: the packaging in the picture may differ from the product supplied. The blue can is often supplied in transparent.
